Titanä EC-20 Timer - 2 Event

P/N:  978-100  (Voltage Selectable for 115 or 230vac)

Features                                                    Accessories are listed at bottom of page

q    2- Event Non-Speed Compensated timer with 2 independently selectable output channels..

q    Output either line voltage or 24 VDC

q    Separate high speed/low speed ranges to control delay and length of the pattern

q    Can be used with proximity or optical sensors, foot switch or any NO (Normally Open) switch.

q    Rugged NEMA control housing with mounting flanges and cover.

Titanä EC-40 Timer - 4 Event

P/N:  978-000  (Voltage Selectable for 115 or 230vac)

Features                                                    Accessories are listed at bottom of page

 q    4- Event Non-Speed Compensated timer with 2 independently selectable output channels.

q    Output either line voltage or 24 VDC.

q    Variable “stitch” mode pattern capability on either channel, selectable

q    Separate high speed/low speed ranges to control delay and length of the pattern

q    Can be used with proximity or optical sensors, foot switch or any NO (Normally Open) switch.

q    Rugged NEMA control housing with mounting flanges and cover.

997-100-038   EC 20/40 Cord, Output to Titan Aux single 24 VDC Applicator

997-100-138   EC 20/40 Cord, Output to Titan Aux single line voltage Applicator

997-100-139   EC 20/40 Cord, Output to Titan Aux 2- Line Voltage Applicator

820-078          Proximity Sensor

820-100          Optical Sensor

978-000-017    Cord, Sensor Extension EC-20/40  10 FT

424-066          Foot Switch Assembly, 2- Stage with 20 FT Cord